Start with an exterior house wash. It is important that you spend some time washing the dirt and grime off the exterior of your house before you start painting. If the exterior surface of your house is free of paint-repelling soil, the primer and paint will adhere better, making the paint last longer. Most of the time, a simple wash with a hose, a pump sprayer and a scrub brush is sufficient, but if you decide that you would prefer a professional to help you, a power washer in the hands of a professional can provide a superior clean.
Location: Arlington, TX Date: 04/06/2021 Number of Rooms: 1 - 2 What is the total square footage of the rooms to be painted?: Under 1500 sqft Which rooms need to be painted? (Check all that apply): Bathroom(s), Other What is the average ceiling height of the rooms you want painted?: 9 ft What needs to be painted? (Check all that apply): Ceiling, Wall, Trim What is the occupancy of the house?: Furnished and occupied Which best describes the condition of your walls?: Good - Has minor cosmetic defects that may require patching Request Stage: Ready to Hire Are you in the process of moving into or out of this home?: No Desired Completion Date: 1 - 2 weeks What kind of location is this?: Home/Residence
When your project nears completion, the team leader conducts a walk-through with you to identify any outstanding items. Once all items have been completed, it is reviewed again and the team leader presents the bill. At that time you provide payment to the team leader made payable to Harrington's. Each team is operated as a micro-business unit by the team leader.
HomeAdvisor uses an extensive screening process to screen businesses and business owners/principals. We perform this screening when a business applies to join our network and, if the business is accepted, whenever concerns are brought to our attention. If you have concerns that a pro in our network doesn't meet these standards, please contact us so we can investigate. We're committed to maintaining a network of trusted home service businesses, and those who don't meet our criteria will be rejected or promptly removed from our network.
Start at the top of your house and work your way down. This serves two purposes. First, it allows you go down the ladder instead of up as you work, preventing potentially life threatening falls. Also, when prepping/scraping the paint off, you will have debris falling on the bottom areas that you just painted. Second, painting from top to bottom prevents messy drips and missed spots. Ideally, you should also start painting from the left side and work your way right because you are more likely to see any missed spots.
Caulk and seal any windows or openings to prevent air and water from leaking in. This may be the most important part of the prepping process. It's important to have a well-maintained, beautified, non-rotting wood house, but it's just as important to make sure that the windows, cracks and openings aren't leaking air or letting in water, which can ruin the interior of your house. Depending on the severity of the deterioration, you can even resort to using a heavy duty, professional grade, industrial caulking.
As the dance proceeds, keep an eye on the weather. Rain can wash freshly applied latex right off the wall, and a temperature dip below 50 degrees F two days after application can interfere with adhesion and curing and dull the sheen of glossy paints. (Latexes like Sherwin-Williams's Duration and Benjamin Moore's MoorGard Low Lustre are formulated to tolerate temps as low as 35 and 40 degrees, respectively.)
The thick canvas stays in place, so you don’t need to tape it, and you can use it to cover any surface. Plastic drop cloths are slippery to walk on or set a ladder on and don’t stay in place. Even worse, paint spills on plastic stay wet, and they can end up on your shoes and get tracked through the house. Canvas is slippery on hard ﬂoors, so rosin paper is better over vinyl, tile and hardwood. Tape the sheets together and to the ﬂoor to provide a nonslip surface.
A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.