"Like any homeowner contemplating painting, repairing, or remodeling, my husband and I dreaded the process of finding an honest, ethical, and dependable individual. We were seeking one whose work was consistently top notch. After interviewing several individuals and small companies, we were lucky enough to find Guy Bell of Guy The Painter & Co." continued »
The thick canvas stays in place, so you don’t need to tape it, and you can use it to cover any surface. Plastic drop cloths are slippery to walk on or set a ladder on and don’t stay in place. Even worse, paint spills on plastic stay wet, and they can end up on your shoes and get tracked through the house. Canvas is slippery on hard ﬂoors, so rosin paper is better over vinyl, tile and hardwood. Tape the sheets together and to the ﬂoor to provide a nonslip surface.
When painting outside, it is always best to check the tin for the minimum/maximum temperatures. You must also take into account chill factors, especially on metal, as this can reduce surface temperatures considerably. From a health and safety perspective, there isn't a specific minimum or maximum temperature for a worker to paint in. Dress appropriately and stay ventilated/hydrated.
Location: Arlington, TX Date: 04/07/2021 Number of Rooms: 1 - 2 What is the occupancy of the house?: Empty of furnishings and unoccupied What needs to be painted? (Check all that apply): Other / I don't know Which rooms need to be painted? (Check all that apply): Other Which best describes the condition of your walls?: I'm not sure - We'll help you determine this later What is the total square footage of the rooms to be painted?: I don't know What is the average ceiling height of the rooms you want painted?: 8 ft Request Stage: Ready to Hire Historical Work: No Desired Completion Date: Timing is flexible Are you in the process of moving into or out of this home?: No What kind of location is this?: Home/Residence Comment: I would like to get an estimate for handyman and plumber put in water heater and painting
Small random-orbit or pad sanders make this job go faster. (Wallis first covers these boundaries with Synkoloid patching compound so no edge is visible after sanding.) As shown, you want to make sure that there is a feathered, smooth transition from exposed wood to old paint. For areas that might get close scrutiny, you can follow up with a 100- or 120-grit rubdown to erase any scratches.
#3 Plastic sheets are the most popular items for protecting shrubs and windows as well as other structures while the painting job is on. But you should think about a onetime investment to keep things economic, simple and more effective. You should choose canvas instead of plastic sheets. They will serve you longer and do a better job of protection. They will also provide with better safety.
When the primer is dry, caulk all small joints (less than ¼-inch-wide) in the siding and trim. Most pros use siliconized acrylics—paint won't stick to straight silicones—but Guertin and O'Neil like the new, more expensive urethane acrylics for their greater flexibility and longevity. O'Neil stresses that it's shortsighted to skimp on caulk. "If the joint fails, you're back to square one." Guertin uses the lifetime rating as his quality guide. "I don't expect 35-year caulk will last 35 years, but it should last longer than a 15-year caulk."
Location: Arlington, TX Date: 04/07/2021 What is the approximate living square footage of your home?: 1500-3000 sqft What is the primary exterior surface material of your home?: Wood How many stories is your home?: Two stories What size is your attached garage?: 2-Car Garage Which best describes the condition of your walls?: Good - Has minor cosmetic defects that may require patching Request Stage: Ready to Hire Desired Completion Date: Timing is flexible Comment: I need a painter to go around the exterior and sand to smooth out surfaces in the wood siding. There is an area on the east side of the house where some of the siding boards need to be replaced. Otherwise go around the house smoothing and caulking the wood surface and then painting to blend. DO NOT CALL ME I WILL AROUND
Start with an exterior house wash. It is important that you spend some time washing the dirt and grime off the exterior of your house before you start painting. If the exterior surface of your house is free of paint-repelling soil, the primer and paint will adhere better, making the paint last longer. Most of the time, a simple wash with a hose, a pump sprayer and a scrub brush is sufficient, but if you decide that you would prefer a professional to help you, a power washer in the hands of a professional can provide a superior clean.
HomeAdvisor uses an extensive screening process to screen businesses and business owners/principals. We perform this screening when a business applies to join our network and, if the business is accepted, whenever concerns are brought to our attention. If you have concerns that a pro in our network doesn't meet these standards, please contact us so we can investigate. We're committed to maintaining a network of trusted home service businesses, and those who don't meet our criteria will be rejected or promptly removed from our network.
With Harrington's, you receive individual attention, both in the field and in the office, from start to finish. We want our project to run seamlessly and transparently to you. Communication is the key to completing a quality project on time while meeting and exceeding your expectations. Painting processes begin after an on-site walk through of the areas to be painted with the assigned team leader. Items covered include:
#1 You should pay attention to preparing the surfaces first making sure repairs take place prior to painting. It's not the fun part of the task, rather it's the most important part of painting. If you fail to prepare the surface, no matter how exclusive painting material you're using, it'll fail. Make sure there is no peeling paint left on wood and use the proper caulk for cracks along the trimwork and other small holes.
By clicking Confirm Appointment, you affirm you have read and agree to the HomeAdvisor Terms & Conditions, and you agree and authorize HomeAdvisor and its affiliates, and their networks of Service Professionals, to deliver marketing calls or texts using automated technology to the number you provided above regarding your project and other home services offers. Consent is not a condition of purchase.
Any change to the scope of your project is properly handled with a written change order, which is normally e-mailed to you. In some cases, you may authorize small additions at the time and material rate verbally with the team leader or the office. Changes are considered addendums to our painting agreement and could affect the project completion date.
If less than half the old paint is left, however, it may be worth stripping it all off. Guertin gets rid of stubborn remnants using shrouded grinders (like the PaintShaver), infrared paint strippers (such as the Speedheater), or chemical strippers (like Multi-Strip), then smooths the wood with a course or two of sanding. When siding (or bank accounts) can't take the shock of a total strip job, Rich O'Neil, of Masterwork Painting in Bedford, Massachusetts, has successfully hidden rough, well-adhered paint under Peel Bond, a thick primer.