If less than half the old paint is left, however, it may be worth stripping it all off. Guertin gets rid of stubborn remnants using shrouded grinders (like the PaintShaver), infrared paint strippers (such as the Speedheater), or chemical strippers (like Multi-Strip), then smooths the wood with a course or two of sanding. When siding (or bank accounts) can't take the shock of a total strip job, Rich O'Neil, of Masterwork Painting in Bedford, Massachusetts, has successfully hidden rough, well-adhered paint under Peel Bond, a thick primer.
Location: Arlington, TX Date: 04/06/2021 Number of Rooms: 3 - 4 What is the total square footage of the rooms to be painted?: Under 1500 sqft Which rooms need to be painted? (Check all that apply): Kitchen, Living Areas, Hallways What is the average ceiling height of the rooms you want painted?: 8 ft What needs to be painted? (Check all that apply): Wall What is the occupancy of the house?: Furnished and occupied Which best describes the condition of your walls?: Very Good - Looks new and requires no repairs Request Stage: Ready to Hire Are you in the process of moving into or out of this home?: No Desired Completion Date: Timing is flexible What kind of location is this?: Home/Residence Historical Work: No Comment: These are NOT large projects Small kitchen wall Living room standard size Hallway standard size
The frequency of your exterior repainting depends on several factors, including where you live, what your house is made out of, and what it was painted with. In North Texas, we’re protected from the salt sprays our coastal friends down south must consider. Even still, strong sunshine and excessive heat during the summer can take a serious toll on the life of your paint. Dark, oil-based paints may fade especially quickly. The paint may blister, too, or form bubbles on the surface. So there’s no concrete answer for how often to repaint your home — but if you start to see chips, cracks, bleaching, blistering, or any other issue that takes away from the appearance of your home, it’s time to consider repainting.

When painting outside, it is always best to check the tin for the minimum/maximum temperatures. You must also take into account chill factors, especially on metal, as this can reduce surface temperatures considerably. From a health and safety perspective, there isn't a specific minimum or maximum temperature for a worker to paint in. Dress appropriately and stay ventilated/hydrated.
Location: Arlington, TX Date: 04/07/2021 What is the approximate living square footage of your home?: 1500-3000 sqft What is the primary exterior surface material of your home?: Brick How many stories is your home?: One story What size is your attached garage?: 2-Car Garage Which best describes the condition of your walls?: Good - Has minor cosmetic defects that may require patching Request Stage: Planning & Budgeting Desired Completion Date: More than 2 weeks

O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away."
A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.
"You get what you pay for...it’s as simple as that. They are not the cheapest but they did an amazing job in just a little over a week, using superior materials and paint than the competition. They have crews on staff that are the best at what they do and it shows. Renfari and JR were incredibly responsive and easy to work with, answering all my questions and concerns quickly and thoroughly. They went out of their way to find and correct peripheral issues, like a leaky outdoor water spigot of which we were unaware. Because they fully back their product, they are going to go out of their way to make sure you get a beautiful 100% complete solution. It was a worry free experience that I
Marie's Trees, is committed to excellence in every aspect of our business! We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.
When the primer is dry, caulk all small joints (less than ¼-inch-wide) in the siding and trim. Most pros use siliconized acrylics—paint won't stick to straight silicones—but Guertin and O'Neil like the new, more expensive urethane acrylics for their greater flexibility and longevity. O'Neil stresses that it's shortsighted to skimp on caulk. "If the joint fails, you're back to square one." Guertin uses the lifetime rating as his quality guide. "I don't expect 35-year caulk will last 35 years, but it should last longer than a 15-year caulk."
"You get what you pay for...it’s as simple as that. They are not the cheapest but they did an amazing job in just a little over a week, using superior materials and paint than the competition. They have crews on staff that are the best at what they do and it shows. Renfari and JR were incredibly responsive and easy to work with, answering all my questions and concerns quickly and thoroughly. They went out of their way to find and correct peripheral issues, like a leaky outdoor water spigot of which we were unaware. Because they fully back their product, they are going to go out of their way to make sure you get a beautiful 100% complete solution. It was a worry free experience that I
To the touch, they still have the chalky feel of flat finishes, but with a slight waxy smoothness. The same paint color will appear slightly richer in a satin sheen than it does in a flat sheen. Satin/eggshell finishes can be wiped down or even hosed with water. Because of the hint of shine, satin paints have a somewhat more luxurious appearance than flat paints. 
When painting outside, it is always best to check the tin for the minimum/maximum temperatures. You must also take into account chill factors, especially on metal, as this can reduce surface temperatures considerably. From a health and safety perspective, there isn't a specific minimum or maximum temperature for a worker to paint in. Dress appropriately and stay ventilated/hydrated.
Location: Arlington, TX Date: 04/06/2021 Number of Rooms: 3 - 4 What is the total square footage of the rooms to be painted?: Under 1500 sqft Which rooms need to be painted? (Check all that apply): Kitchen, Living Areas, Hallways What is the average ceiling height of the rooms you want painted?: 8 ft What needs to be painted? (Check all that apply): Wall What is the occupancy of the house?: Furnished and occupied Which best describes the condition of your walls?: Very Good - Looks new and requires no repairs Request Stage: Ready to Hire Are you in the process of moving into or out of this home?: No Desired Completion Date: Timing is flexible What kind of location is this?: Home/Residence Historical Work: No Comment: These are NOT large projects Small kitchen wall Living room standard size Hallway standard size
CertaPro Painters® is the largest franchised residential and commercial painting company in North America. CertaPro has more than 350 locally owned and operated businesses in the United States and Canada. Since 1992, CertaPro Painters has created a customer experience that is unmatched. This is what has made us North America’s Most Referred Painting Company.®

With Harrington Home Painting, you know what to expect every step of the way. Gather as much information as possible for your first Harrington Home Painting consultation. We have a professional team that can create a plan to fit your project needs, style and budget. We aim to make the painting experience as comfortable as possible, with no unexpected costs or delays.
Location: Arlington, TX Date: 04/07/2021 What is the approximate living square footage of your home?: 1500-3000 sqft What is the primary exterior surface material of your home?: Wood How many stories is your home?: Two stories What size is your attached garage?: 2-Car Garage Which best describes the condition of your walls?: Good - Has minor cosmetic defects that may require patching Request Stage: Ready to Hire Desired Completion Date: Timing is flexible Comment: I need a painter to go around the exterior and sand to smooth out surfaces in the wood siding. There is an area on the east side of the house where some of the siding boards need to be replaced. Otherwise go around the house smoothing and caulking the wood surface and then painting to blend. DO NOT CALL ME I WILL AROUND
Exterior paint also needs a dry surface for an even coat and proper adherence. Unfortunately, moisture isn’t a problem in Texas right now. If a fluke rain storm does occur, it’s best to wait at least one full day before painting. Your professional painting company can discuss your exterior paint job to help you understand when is the optimal time for repainting.
Small random-orbit or pad sanders make this job go faster. (Wallis first covers these boundaries with Synkoloid patching compound so no edge is visible after sanding.) As shown, you want to make sure that there is a feathered, smooth transition from exposed wood to old paint. For areas that might get close scrutiny, you can follow up with a 100- or 120-grit rubdown to erase any scratches.
×