#1 You should pay attention to preparing the surfaces first making sure repairs take place prior to painting. It's not the fun part of the task, rather it's the most important part of painting. If you fail to prepare the surface, no matter how exclusive painting material you're using, it'll fail. Make sure there is no peeling paint left on wood and use the proper caulk for cracks along the trimwork and other small holes.
Any change to the scope of your project is properly handled with a written change order, which is normally e-mailed to you. In some cases, you may authorize small additions at the time and material rate verbally with the team leader or the office. Changes are considered addendums to our painting agreement and could affect the project completion date.
A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.
Deciding which paint to use has gotten much easier now that acrylic latexes have pushed oil-based paints almost to extinction. The acrylics offer superior performance (they don't harden with age, the way oils do, so they move and breathe without blistering), they don't mildew as readily, and they emit fewer VOCs, so they comply with new air-quality regulations. They also work over both oil- and water-based primers.
#1 You should pay attention to preparing the surfaces first making sure repairs take place prior to painting. It's not the fun part of the task, rather it's the most important part of painting. If you fail to prepare the surface, no matter how exclusive painting material you're using, it'll fail. Make sure there is no peeling paint left on wood and use the proper caulk for cracks along the trimwork and other small holes.
A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.

First, if you need it, we have it — all the paint for you home — every color you can imagine, in the finish you need, for every surface. Second, we’ can help narrow down your wall paint color choice until you decide on the right paint for your project. Of course, our paint associates at your local store can help pick our paint for your home. Pick up some paint swatches or order paint samples online so you can picture what it will look like. 

×