If less than half the old paint is left, however, it may be worth stripping it all off. Guertin gets rid of stubborn remnants using shrouded grinders (like the PaintShaver), infrared paint strippers (such as the Speedheater), or chemical strippers (like Multi-Strip), then smooths the wood with a course or two of sanding. When siding (or bank accounts) can't take the shock of a total strip job, Rich O'Neil, of Masterwork Painting in Bedford, Massachusetts, has successfully hidden rough, well-adhered paint under Peel Bond, a thick primer.
Deciding which paint to use has gotten much easier now that acrylic latexes have pushed oil-based paints almost to extinction. The acrylics offer superior performance (they don't harden with age, the way oils do, so they move and breathe without blistering), they don't mildew as readily, and they emit fewer VOCs, so they comply with new air-quality regulations. They also work over both oil- and water-based primers.
Location: Arlington, TX Date: 04/07/2021 Number of Rooms: 3 - 4 What is the total square footage of the rooms to be painted?: Under 1500 sqft Which rooms need to be painted? (Check all that apply): Living Areas, Dining Room, Hallways What is the average ceiling height of the rooms you want painted?: 8 ft What needs to be painted? (Check all that apply): Wall What is the occupancy of the house?: Furnished and occupied Which best describes the condition of your walls?: Good - Has minor cosmetic defects that may require patching Request Stage: Planning & Budgeting Are you in the process of moving into or out of this home?: No Desired Completion Date: Timing is flexible What kind of location is this?: Home/Residence Historical Work: No
When painting outside, it is always best to check the tin for the minimum/maximum temperatures. You must also take into account chill factors, especially on metal, as this can reduce surface temperatures considerably. From a health and safety perspective, there isn't a specific minimum or maximum temperature for a worker to paint in. Dress appropriately and stay ventilated/hydrated.
When choosing the right painting contractor for your home, we know that you want reliable, friendly, and efficient painting contractors who will treat your home as if it’s their own. When you choose Southern Painting for your painting projects, we guarantee a commitment to quality and service. Our experienced painters are courteous and will respect your property. We arrive on time and finish the job, on schedule, and on budget. In addition, Our expert painters are efficient, from thorough prep work to the final cleanup of a site.
Location: Arlington, TX Date: 04/06/2021 Number of Rooms: 3 - 4 What is the occupancy of the house?: Furnished and occupied What needs to be painted? (Check all that apply): Wall, Trim Which rooms need to be painted? (Check all that apply): Bathroom(s), Bedroom(s), Living Areas, Hallways Which best describes the condition of your walls?: Good - Has minor cosmetic defects that may require patching What is the total square footage of the rooms to be painted?: Under 1500 sqft What is the average ceiling height of the rooms you want painted?: 9 ft Request Stage: Ready to Hire Historical Work: No Desired Completion Date: Timing is flexible Are you in the process of moving into or out of this home?: No What kind of location is this?: Home/Residence Comment: total three rooms and tiny hall about 600 sq feet. only lv rm ceiling over 8 feet (slant up to 11 feet) no ceilings to be painted. all wall to be antique white, pure white trim.
If less than half the old paint is left, however, it may be worth stripping it all off. Guertin gets rid of stubborn remnants using shrouded grinders (like the PaintShaver), infrared paint strippers (such as the Speedheater), or chemical strippers (like Multi-Strip), then smooths the wood with a course or two of sanding. When siding (or bank accounts) can't take the shock of a total strip job, Rich O'Neil, of Masterwork Painting in Bedford, Massachusetts, has successfully hidden rough, well-adhered paint under Peel Bond, a thick primer.
As the dance proceeds, keep an eye on the weather. Rain can wash freshly applied latex right off the wall, and a temperature dip below 50 degrees F two days after application can interfere with adhesion and curing and dull the sheen of glossy paints. (Latexes like Sherwin-Williams's Duration and Benjamin Moore's MoorGard Low Lustre are formulated to tolerate temps as low as 35 and 40 degrees, respectively.)
With Harrington's, you receive individual attention, both in the field and in the office, from start to finish. We want our project to run seamlessly and transparently to you. Communication is the key to completing a quality project on time while meeting and exceeding your expectations. Painting processes begin after an on-site walk through of the areas to be painted with the assigned team leader. Items covered include: 

Walls should be wet down before getting scrubbed, then washed with a gallon of water mixed with 1 cup chlorine bleach and 1 cup of either a concentrated, phosphate-free cleaner, such as a trisodium phosphate (TSP) substitute, or Jomax House Cleaner. Working in sections, from the bottom to the top, will avoid streaks. Be sure to rinse walls well before the solution dries. Wood siding and trim should be ready to paint after a day or two of dry weather.

×